FixVault
Home › Saab › 2002 › 9-3 SE, 2D Convertible, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - System/Component Tests › Checking For Open Circuits/Short Circuits › Checking For Short Circuits To Ground

Checking For Short Circuits To Ground

  1. Make sure there is no power being supplied to the lead to be checked (e.g. by removing the relevant fuse) and that any loads have been disconnected.
  2. Set the multimeter to ohm measurement.
  3. Connect one test lead to a reliable ground and the other to the point to be checked.
  4. Carefully jiggle the wiring harness and check that the multimeter shows a constant infinite value (OL).
About FixVault