Tech 2

1. Look at the 'FASTEN SEATBELT' lamp
2. Press the remote control unlock button once per second until the 'FASTEN SEATBELT' lamp blinks once. More than 8 presses on the button may be necessary.
3. Remove the key from the ignition switch and fit the next key.
4. Turn the key to the 'ON' position.
5. Repeat steps 1 and 2.

Additional keys and remote controls are programmed in following points 3-5.

Press 'OK' once all keys and remote controls are programmed.

1. Once all keys are programmed, select "Immobilization".
2. Perform immobilization programming.
3. Clear DTCs in TWICE.
4. Clear DTCs in the engine management system.
5. Discard the accompanying transponder.
6. Fill in the return form that comes with the spare part package and return TWICE within 40 days of the order date.