FixVault
Home › Saab › 2003 › 9-3 Linear, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Gear Selector Mechanism (Automatic) › Adjustment/Replacement › Ignition Switch Connector › To fit

To fit

Fig 1: Illustration For Step 1
G03577930Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Screw the ignition switch connector in place. Use Loctite 242 thread-locking adhesive, part number 74 96 268, on the screws.
  2. Fit the selector lever housing, see SELECTOR LEVER HOUSING .
About FixVault