To fit

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.

Fit the control module, one screw.
Plug in the connector
Make sure the engine can be started.

Fig 1: Illustration For Step 3-4
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Replace the carpet.
Fit the glove box.

Fig 2: Illustration For Step 5
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Reset the immobilizer in the following way:
- Connect Tech2 and turn the ignition to ON
- Select Body and TWICE
- Select Immobilizing. The immobilizer will be programmed after about 10 seconds.