Section 48 (Engine - Repair)
WARNING: This page is about a different car, the 2005 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
- Adjustment - Replacement
- Power train removal
- Fitting the power train
- Cylinder head
- Changing engine oil and oil filter
- Balancer shaft chain
- Belt tensioner with breaker wheel
- Engine compression test
- Timing cover
- Timing chain and camshaft sprocket
- Drive belt, auxiliary assembly (poly-V)
- Check the engine oil pressure.
- Check camshaft setting
- Camshaft cover with gasket
- Timing chain tensioner
- Front crankshaft gasket.
- Rear crankshaft seal
- Balancer shaft transmission
- Oil sump
- Checking for oil/fluid leaks
- Checking condition of drive belt and belt tensioner
- Engine mounting, left-hand
- Engine mounting, right
- Oil pump
- Oil pressure valve
- Procedures after disconnecting the battery
- Removing the cylinder block
- Fitting the spare part cylinder block
- Changing piston rings
- Rear torque arm
- Front torque arm
- Special tools
- 30 05 477 Cooling system tester
- 30 05 469 Adapter, cooling system tester
- 78 74 878 Floor stand
- 83 90 270 Sliding hammer
- 83 90 858 Journal
- 83 93 886 Diagnostics cable, LH system
- 83 94 751 Holder, engine
- 83 94 850 Lifting beam
- 83 94 934 Fitting kit, rear crankshaft seal
- 83 94 975 Fitting tools, rear crankshaft seal
- 83 95 113 Piston fitting tool, V6, 3.0
- 83 95 360 Support, crankshaft belt pulley
- 83 95 261 Fuel line tool
- 83 96 046 Adjustment tool, camshaft (B207, 150-175 hp)
- 83 96 079 Adjustment tool, camshaft (B207, 210 HP)
- 83 96 095 Release tool, belt circuit B207E/L
- 83 96 111 1" PU wrench, oil pressure sensor, V6 diesel
- 83 95 212 Strap
- 83 96 129 Oil filter tool, B207, and camshaft drive chain tensioner
- 83 96 152 Centering tool, powertrain
- 83 96 277 Centering drift clutch disc, 6-speed transmission
- 83 96 186 27 mm PU wrench, 15°, oil pressure sensor, B207
- 83 96 202 Fitting tool, front crankshaft seal, B207
- 83 96 210 Holding tool, crankshaft pulley, B207
- 83 96 392 Lock pin
- 87 91 683 Puller
- 87 92 350 Puller, drive shaft seal
- 87 92 574 Holder
- 87 92 616 Removing tool, drive shafts
- 89 96 951 Puller, drive shaft
- Technical data
- Technical description