RH Side

Install in the reverse order of removal.

Tightening torque (Spark plug):

21 Nm (2.1 kgf-m, 15.2 ft -lb)

Tightening torque (Ignition coil):

16 Nm (1.6 kgf-m, 11.7 ft -lb)

NOTE: The above torque should be only applied to new spark plugs without oil on their threads.

In case their threads are lubricated, the torque should be reduced by approx. 1/3 of the specified torque in order to avoid overstressing. Install in the reverse order of removal.