Data Link Connector: Note:
This connector is used both for OBD-II general scan tools and the Vehicle Diagnostic Interface.
IMPORTANT:
Do not connect any scan tools other than the OBD-II general scan tools and the Vehicle Diagnostic Interface, because the circuit for the Vehicle Diagnostic Interface may be damaged.
DATA LINK CONNECTOR TERMINALS SPECIFICATION
| Terminal No. | Contents | Terminal No. | Contents |
|---|---|---|---|
| 1 | Power supply | 9 | Blank |
| 2 | Blank | 10 | Vehicle Diagnostic Interface signal |
| 3 | Blank | 11 | Blank |
| 4 | Blank | 12 | Ground |
| 5 | Blank | 13 | Ground |
| 6 | Test mode check signal 1 | 14 | Blank |
| 7 | Blank | 15 | Blank |
| 8 | Test mode check signal 2 | 16 | Blank |