Installation Procedure

Fig 1: Disconnecting/Connecting Liftgate Module Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the bolts that retain the module to the liftgate.
Tighten: Tighten the bolts to 10 N.m (89 lb in).
Connect the electrical connectors (3) as necessary.
Install the liftgate trim panel. Refer to Trim Panel Replacement - Liftgate .
Program the liftgate control module. Refer to Control Module References in Computer/Integrating Systems.