FixVault
Home › Saab › 2005 › 9-7X Linear › Repair and Diagnosis › Accessories & Equipment › Entertainment Systems › Cellular Communication › Repair Instructions › Navigation Control Processor Bracket Replacement › Removal Procedure

Removal Procedure

  1. Remove the right rear seat cushion. Refer to Seat Cushion Replacement - Rear No. 1 in Seats.
  2. Remove the communication interface module. Refer to Communication Interface Module Replacement  in Interior Trim.
    3. Fig 1: Releasing Retaining Tab On Upper Bracket
    GM741626Courtesy of GENERAL MOTORS CORP.
  3. Using a flat bladed tool, release the retaining tab on the upper bracket.
  4. Slide the upper bracket inboard until the retaining tabs are released from the processor bracket.
  5. Remove the upper bracket from the processor bracket.
    6. Fig 2: Processor Bracket Retaining Nut
    GM742195Courtesy of GENERAL MOTORS CORP.
  6. Remove the nut that retains the processor bracket to the rear seat back stud.
  7. Remove the processor bracket from the vehicle.
About FixVault