FixVault
Home › Saab › 2005 › 9-7X Linear › Repair and Diagnosis › Accessories & Equipment › Wiper/Washer Systems › Wipers/Washer Systems › Repair Instructions › Windshield Outside Moisture Sensor Replacement › Installation Procedure

Installation Procedure

  1. Clean the mounting location on the windshield using a clean lint free cloth with isopropyl alcohol.
    2. Fig 1: Removing/Installing Rain Sensor & Retaining Ring
    GM756193Courtesy of GENERAL MOTORS CORP.
  2. Install the rain sensor (1) to the windshield.
  3. Connect the electrical connector to the rain sensor (1).
About FixVault