FixVault
Home › Saab › 2005 › 9-7X Linear › Repair and Diagnosis › Body & Frame › Frames, Subframes & Crossmembers › Frame And Underbody › Repair Instructions › Engine Protection Shield Replacement › Removal Procedure

Removal Procedure

    Fig 1: Removing/Installing Engine Shield
    GM687450Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the engine shield mounting bolts.
  3. Remove the engine shield.
About FixVault