FixVault
Home › Saab › 2005 › 9-7X Linear › Repair and Diagnosis › Body & Frame › Frames, Subframes & Crossmembers › Frame And Underbody › Repair Instructions › Radiator Support Shield Replacement › Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Radiator Support Shield
    GM769533Courtesy of GENERAL MOTORS CORP.
  1. Install the radiator support shield.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the radiator support shield mounting nuts and bolts.

    Tighten:  Tighten the radiator support shield mounting nuts to 17 N.m (13 lb ft).

  3. Lower the vehicle.
About FixVault