FixVault
Home › Saab › 2005 › 9-7X Linear › Repair and Diagnosis › Body & Frame › Seats › Repair Instructions › Lumbar Switch Replacement - Front › Installation Procedure

Installation Procedure

    Fig 1: View Of Bulkhead Connector
    GM752953Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the lumbar switch.
  2. Install the lumbar switch to the switch bezel assembly, verifying that the retaining tabs are fully seated.
  3. Install the power seat switch. Refer to Seat Switch Replacement - Power .
  4. Install the switch bezel assembly to the seat. Refer to Seat Switch Bezel Replacement .
About FixVault