FixVault
Home › Saab › 2005 › 9-7X Linear › Repair and Diagnosis › Electrical › Charging Systems › Engine Electrical › Repair Instructions › Battery Positive Cable Replacement (4.2L Engine) › Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
    2. Fig 1: Identifying Battery Cable Components
    GM899613Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the battery positive cable (4) from the battery.
    3. Fig 2: View Of Positive Cable Lead At Junction Block
    GM759304Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the positive cable lead from the junction block (1).
  4. Disconnect the battery cable conduit from the conduit retaining clip.
  5. Remove the battery positive cable from the conduit.
  6. Remove the battery positive cable harness from the fir-tree retainer on the powertrain control module (PCM) bracket.
    7. Fig 3: View Of Starter & Related Components
    GM754358Courtesy of GENERAL MOTORS CORP.
  7. Disconnect the positive cable lead from the starter (1).
    8. Fig 4: Rear Of Generator (Alternator) View
    GM754357Courtesy of GENERAL MOTORS CORP.
  8. Disconnect the positive cable lead from the generator (1).
  9. Remove the battery positive cable from the vehicle.
About FixVault