FixVault
Home › Saab › 2005 › 9-7X Linear › Repair and Diagnosis › Engine Performance › System › Engine Controls - 4.2L - Introduction › Repair Instructions › Secondary Air Injection (AIR) Pump Replacement › Removal Procedure

Removal Procedure

  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    2. Fig 1: View Of Secondary Air Injection (AIR) Pump
    GM1297873Courtesy of GENERAL MOTORS CORP.
  2. Disconnect both the air inlet and air outlet pipes from the secondary air injection (AIR) reaction pump.
  3. Remove the electrical relay from the AIR pump bracket.
  4. Disconnect the electrical connector from the AIR pump.
  5. Remove the 3 bolts securing the AIR pump bracket to the vehicle frame.
  6. Remove the AIR pump from the vehicle.
About FixVault