FixVault
Home › Saab › 2005 › 9-7X Linear › Repair and Diagnosis › External Pages › Different variant/trim › Section 1 (Engine Controls - 5.3L - Introduction) › Repair Instructions › Fuel Tank Pressure Sensor Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
    2. Fig 1: Identifying Fuel Tank Pressure Sensor
    GM1480291Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the fuel tank pressure sensor electrical connector.
  3. Remove the fuel tank pressure sensor.
About FixVault