FixVault
Home › Saab › 2006 › 9-7X 4.2i › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Repair Instructions › Traction Control Switch Replacement (Console Mounted) › Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Traction Control Switch
    GM1265375Courtesy of GENERAL MOTORS CORP.
  1. Install the switch (1) to the trim plate.
    2. Fig 2: Removing/Installing Traction Control Switch Retaining Ring
    GM1265370Courtesy of GENERAL MOTORS CORP.
  2. Install the retaining ring to the switch, ensuring the ring tabs are fully seated.
    3. Fig 3: Traction Control Switch Electrical Connector
    GM1265379Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector (1) to the switch.
  4. Install the shift lever bezel. Refer to Console Shift Lever Bezel Replacement in Instrument Panel, Gages, and Console.
About FixVault