FixVault
Home › Saab › 2007 › 9-3 2.0T, 2D Convertible, Automatic › Repair and Diagnosis › Steering › Steering Linkage › Repair Instructions › Column Integration Module, CIM (703) › To fit

To fit

IMPORTANT:

Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector.

  1. Plug in the control module connector and fit the clip.
    Fig 1: Identifying Control Module Connector And Clip
    G05061118Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Fit the control module to the steering shaft.
    Fig 2: Locating Control Module And Steering Shaft
    G05061119Courtesy of SAAB-SCANIA OF AMERICA, INC.
  3. Fit the gaiter to the control module.
    Fig 3: Identifying Control Module And Gaiter
    G05061120Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. Make sure that the wheels are pointing straight ahead. Turn the contact roller so that the pointer is in the middle of the indicator opening.
    Fig 4: Identifying Pointer On Contact Roller
    G05061761Courtesy of SAAB-SCANIA OF AMERICA, INC.
  5. Fit the STEERING WHEEL .
  6. Carry out PROCEDURE AFTER CHANGING THE CONTROL MODULE (2006) or MEASURES AFTER CHANGING THE CONTROL MODULE (2007) .
About FixVault