Microswitch, bootlid/tailgate: Fitting

Fit the microswitch.

Fig 1: Illustration For Steps 1-2
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Plug in the flat pin connector. Use a screwdriver to lift up the seal.
Fit the catch securing the microswitch. Make sure it engages properly.
Fit the molding to the bootlid.

Fig 2: Illustration For Steps 4-6
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fit the nuts securing the molding to the bootlid.
Plug in the microswitch connector.
Fit the bootlid trim .

Fig 3: Illustration For Step 7
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Functional check