FixVault
Home › Saab › 2007 › 9-5 4D Sedan, Standard › Repair and Diagnosis › Electrical › Horns › Lighting And Signaling Systems › Repair Instructions › Load angle sensor, front › To remove

To remove

  1. Raise the car.
  2. Remove the belt cover.
  3. Unplug the sensor.
    Fig 1: Illustration For Steps 3-5
    G05036132Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. Loosen the upper link arm ball joint.
  5. Remove the bracket with sensor by undoing the screws.
  6. Remove the sensor from the bracket by undoing the screws.
    Fig 2: Illustration For Step 6
    G05036133Courtesy of SAAB-SCANIA OF AMERICA, INC.
About FixVault