FixVault
Home › Saab › 2007 › 9-7X 4.2i › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Data Communications › Repair Instructions › Liftgate Control Module Replacement › Removal Procedure

Removal Procedure

  1. Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
  2. Disconnect the electrical connectors (3) from the module as necessary.
    Fig 1: Liftgate Module Electrical Connectors
    GM749979Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolts that retain the module to the liftgate.
  4. Remove the module from the liftgate.
About FixVault