FixVault
Home › Saab › 2007 › 9-7X 4.2i › Repair and Diagnosis › Body & Frame › Mirrors › Repair Instructions › Power Mirror Switch Replacement › Installation Procedure

Installation Procedure

  1. Connect the electrical connector to the power folding mirror switch.
    Fig 1: Outside Mirror Switch Retaining Tabs From Trim Panel
    GM714018Courtesy of GENERAL MOTORS CORP.
  2. Position the power folding mirror switch to the door trim panel.
  3. Apply downward pressure to the power folding mirror switch, ensuring the retaining tabs are fully seated.
About FixVault