Installation Procedure

Slide the mirror (2) onto the support button (1).

Fig 1: View Of Rearview Mirror Mounting Components
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .
Install the set screw.
Tighten: Tighten the set screw to 2 N.m (18 lb in).
Connect the wire cover to the upper mirror base.
Connect the electrical connector (1), if equipped.

Fig 2: Wire Connector & Mirror
Courtesy of GENERAL MOTORS CORP.
Reposition the mirror.
Refer to Control Module References for programming and setup information.