Installation Procedure

Install the battery positive cable to the generator and secure the positive cable with the nut (1).
Tighten: Tighten the generator positive cable nut to 9 N.m (80 lb in).

Fig 1: View Of Rear Generator (Alternator)
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .
Install the generator and secure the generator with 3 bolts.
Tighten: Tighten the generator bolts to 50 N.m (37 lb ft).
Install the engine lift hook and secure the lift hook with 2 bolts.
Tighten: Tighten the bolts to 50 N.m (37 lb ft).

Fig 2: View Of Engine Lift Bracket
Courtesy of GENERAL MOTORS CORP.
Install the A/C line bracket to the lift hook and secure the bracket with the bolt.
Tighten: Tighten the A/C line bracket bolt to 10 N.m (89 lb in).

Fig 3: View Of Engine Lift Hook & A/C Bracket Bolt
Courtesy of GENERAL MOTORS CORP.
Install the drive belt. Refer to Drive Belt Replacement .
Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .