Removal Procedure

Remove the console. Refer to Console Replacement .

Fig 1: Removing/Installing Center Console Assembly
Courtesy of GENERAL MOTORS CORP.
Disconnect the shift lock actuator (3) electrical connector.

Fig 2: Disconnecting/Reconnecting Shift Lock Actuator Electrical Connector
Courtesy of GENERAL MOTORS CORP.
Shift assembly to the LOW position.

Fig 3: Removing/Installing Shift Lock Actuator
Courtesy of GENERAL MOTORS CORP.
Loosen and remove the screw at the rear of the shiftier assembly.
Shift the assembly to the NEUTRAL position.
Loosen and remove the top screw of the shift lock actuator through the lever slot.
Pull lever to the DRIVE position and remove the shift lock actuator.