FixVault
Home › Saab › 2009 › 9-3 2.0T, 2D Convertible, Standard › Repair and Diagnosis › Electrical › Horns › Lighting And Signaling Systems › Repair Instructions - Control Modules › Load angle sensor, front › To fit

To fit

  1. Plug in the connector.
    Fig 1: Illustration For Steps 1-3
    G05055409Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Refit console with sensor.
  3. Refit upper ball section in link arm.
  4. Carry out AHL control module calibration .
About FixVault