FixVault
Home › Saab › 2009 › 9-3 2.0T, 2D Convertible, Standard › Repair and Diagnosis › Electrical › Horns › Lighting And Signaling Systems › Repair Instructions - Control Modules › Load angle sensor, front › To remove

To remove

  1. Release the upper ball section in the link arm.
    Fig 1: Illustration For Steps 1-3
    G05055408Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Remove the console and sensor.
  3. Separate connector.
About FixVault