FixVault
Home › Saab › 2009 › 9-7X 4.2i › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 4.2L - Introduction › Repair Instructions › Camshaft Position Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Locating Camshaft Position Sensor Electrical Connector
    GM487648Courtesy of GENERAL MOTORS CORP.
  1. Remove the camshaft position (CMP) sensor electrical connector (1).
  2. Remove the CMP sensor retaining bolt.
About FixVault