FixVault
Home › Saab › 2009 › 9-7X 4.2i › Repair and Diagnosis › Steering › Steering Column › Steering Wheel And Column › Repair Instructions › Multifunction Turn Signal Switch Housing Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Turn Signal Switch Housing & Steering Column Shaft Assembly
    GM664269Courtesy of GENERAL MOTORS CORP.
    WARNING: Refer to SIR Warning .
  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the steering wheel from the column. Refer to Steering Wheel Replacement .
  3. Remove the turn signal and multifunction switch assembly. Refer to Turn Signal Multifunction Switch Replacement .
  4. Remove the windshield washer switch assembly. Refer to Windshield Wiper and Washer Switch Replacement .
  5. Remove the turn signal cancel cam. Refer to Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement .
  6. Slide the turn signal switch housing off of the steering column shaft assembly.
About FixVault