FixVault
Home › Saab › 2009 › 9-7X 4.2i › Repair and Diagnosis › Steering › Steering Column › Steering Wheel And Column › Repair Instructions › Steering Wheel Replacement › Installation Procedure

Installation Procedure

    Fig 1: Steering Wheel & Steering Wheel Shaft
    GM731652Courtesy of GENERAL MOTORS CORP.
  1. Install the steering wheel to the steering wheel shaft.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the retaining nut that secures the steering wheel to the steering wheel shaft. Tighten the retaining nut to 41 N.m (30 lb ft).
    3. Fig 2: Steering Wheel Electrical Connector
    GM731656Courtesy of GENERAL MOTORS CORP.
  3. Connect the steering wheel electrical connector.
  4. Install the horn plunger to the steering column.
  5. Install the inflator module. Refer to Steering Wheel Inflatable Restraint Module Replacement .
  6. Enable the SIR system. Refer to SIR Disabling and Enabling .
About FixVault