FixVault
Home › Saab › 2010 › 9-5 › Repair and Diagnosis › Brakes › Traction Control › TCS/Esp › Fault diagnosis, fault codes › DTC C0131: Traction Control System Pressure Circuit › Circuit/System Testing

Circuit/System Testing

  1. Verify that DTC C0131 5A is not present.
  2. If DTC C0131 5A is present, perform the BRAKE PRESSURE MODULATOR VALVE PRESSURE SENSOR CALIBRATION .
  3. Replace the brake pressure modulator valve assembly and verify the DTC does not reset.
  4. If the DTC resets replace the K17 Electronic Brake Control Module.
About FixVault