FixVault
Home › Saab › 2011 › 9-3X Automatic › Repair and Diagnosis › Electrical › Body Electrical › General Electrical › Repair Instructions - Control Modules › Body Control Module (BCM) (707) › To fit

To fit

  1. Fit the control module.
    Fig 1: Illustration For Steps 1-2
    G05571139Courtesy of SAAB-SCANIA OF AMERICA, INC.
    IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to CONNECTORS, HANDLING AND INSPECTION .
  2. Plug in the connector.
  3. Fit the lower section of the dashboard. See DASHBOARD .
    Fig 2: Illustration For Step 3
    G05571140Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. If the control module has been replaced:  Carry out procedures after changing a control module. See Procedure after changing the control module .
About FixVault