FixVault
Home › Saab › 2011 › 9-3X Automatic › Repair and Diagnosis › Electrical › Body Electrical › General Electrical › Repair Instructions - Control Modules › Headlamp control module (682) › To remove

To remove

  1. If replacing the control module:  Perform diagnostic procedures before control module removal .
  2. Turn the ignition key to the LOCK position.
  3. Remove the headlamp. See HEADLAMPS .
  4. Turn the headlamp upside down and remove the screws (A) of the AFL control module.
    Fig 1: Identifying AFL Control Module Screws
    G05571172Courtesy of SAAB-SCANIA OF AMERICA, INC.
About FixVault