To fit
- Fit the control module.
Courtesy of SAAB-SCANIA OF AMERICA, INC.
IMPORTANT:
Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to CONNECTORS, HANDLING AND INSPECTION .
- Plug in the connectors.
- Fit the battery cooling pipe.
- Fit the battery cover.
- Perform Procedures after fitting the control module and service programming, if necessary. See Procedure after changing the control module .
- If a new control module has been fitted, it must be adapted, see ADAPTATION, RESETTING
.