To remove

Fit the subframe. See SUBFRAME, B207 , Subframe, remove and install, Z19, SUBFRAME, B284 or SUBFRAME, B284, 4WD .
Cut away the rubber from the bush.

Fig 1: Illustrations For Step 2-4
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Saw or cut a groove on either side. Break off the flange from the bush to make room for the support.
Cut away the rubber edge protruding from the underside of the bush.
Remove the bush using a pull rod 907 and press sleeve KM 907-14 from 89 96 779 SET OF PRESS SLEEVES, FRONT ASSEMBLY and a support from 89 96 902 SUBFRAME BUSH SET

Fig 2: Pressing Sleeve KM 907-14
Courtesy of SAAB-SCANIA OF AMERICA, INC.