To remove

Remove Transfer case, B284 or Transfer case, B207 .
Fit the transfer case in 78 74 878 Floor stand, using 32 025 053 Holder (EN-47642).

Fig 1: Identifying Transfer Case
Courtesy of SAAB-SCANIA OF AMERICA, INC.

IMPORTANT: Circlip opening towards "whole" surface.
Remove the outer circlip (A) from the housing.

Fig 2: Removing Outer Circlip From Housing
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Tap out the intermediate shaft (A) with a rubber mallet.

Fig 3: Tapping Intermediate Shaft With Rubber Mallet
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Remove the circlips (A) and (B).

Fig 4: Identifying Circlips Location
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Remove the bearing (C), using tool 87 90 982 Ring, pinion bearing (D) to press off the bearing.

Fig 5: Removing Bearing And Pinion Bearing
Courtesy of SAAB-SCANIA OF AMERICA, INC.