FixVault
Home › Saab › 2011 › 9-3X Standard › Repair and Diagnosis › Electrical › Body Electrical › General Electrical › Repair Instructions - Control Modules › Door control module, CV (702D/P) › To remove

To remove

  1. Perform the procedure for Before changing a control module .
  2. Remove Door trim, CV. See DOOR TRIM, CV
  3. Lay the side of the door on a clean, soft surface.
  4. Unplug the connector for the luggage compartment switch.
  5. When replacing the driver's door module: Remove the door trim bolt.
    Fig 1: Illustration For Steps 5-6
    G05571128Courtesy of SAAB-SCANIA OF AMERICA, INC.
  6. Remove the control module with a screwdriver. First, remove the rear clip followed by the internal and external door module clips. Carefully pull the control module downwards and to the rear.
About FixVault