Replace and Program ECU or Reprogram ECU

To program a replacement or an existing ECU, perform the following procedure:

1. Install EL-49642
2. Access the Service Programming System (SPS) and follow the on-screen instructions.
3. Select Instrument Cluster - Programming on the screen with SPS support and follow the on-screen instructions.
4. Select Instrument Cluster - Configuration on the screen with SPS support and follow the on-screen instructions.
5. Select Instrument Cluster - Setting on the screen with SPS support and follow the on-screen instructions.
6. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.