FixVault
Home › Saab › 2011 › 9-5 Turbo4, Standard › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Bus And Diagnostics Communication › Adjustment Replacement › Electronic Parking Brake Control Module Programming and Setup › Calibration without Scan Tool

Calibration without Scan Tool

  1. Ignition ON, apply and hold the brake pedal.
  2. Push and hold the electric parking brake switch down for 5-6 seconds.
  3. Release the electric parking brake switch.
  4. Momentarily push the electric parking brake switch down.
  5. Remove the EPB MODULE fuse and reinstall.
  6. Apply the electric parking brake.
  7. Release the electric parking brake.
About FixVault