Vehicle Communication Interface Module Scan Tool Data Parameters
VEHICLE COMMUNICATION INTERFACE MODULE SCAN TOOL OUTPUT CONTROLS
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Date | - | Numeric | This displays DD/MM/YYYY. This is the date the VCIM was manufactured. |
| GPS Signal | - | Yes | The diagnostic tool shows Yes or No. Yes is shown if there is a GPS-signal that is being received by VCIM. |
| Signal Strength | - | 68 | The scan tool displays 0-100. This is the VCIM signal strength. |
| Signal Type | - | Digital | The scan tool displays Digital or Analog. This is the signal type received by the VCIM. |
| Time | - | Numeric | The scan tool displays HH:MM:SS. This is the current time. |
| Transceiver ID | - | Varies | The scan tool displays a 2-5 digit value. This is the transceiver identification number. |