Driver Inflator Module: Installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Saturn SW2, 1995 Saturn SW1, 1995 Saturn SL2, 1995 Saturn SL1, and 1995 Saturn SL. However, it is still accessible from the selected car via links, so may be relevant.
Connect inflator module to wiring harness and install integral connector lock device. Install inflator module into steering wheel and torque fasteners. See TORQUE SPECIFICATIONS table. Being careful not to cross thread fasteners. Snap on screw covers. Enable SIR system. See DISABLING & ACTIVATING AIR BAG SYSTEM .