Driver's Door Key Switch

Unplug switch. Test for continuity at each position. Refer to Fig. Figure . Replace switch if continuity is not as specified.

• With switch set to lock position, continuity should exist between pin "C" and pin "B".
• With switch set to lock position, continuity should not exist between pin "A" and pin "B".
• With switch set to unlock position, continuity should exist between pin "A" and pin "B".
• With switch set to unlock position, continuity should not exist between pin "C" and pin "B".
• With switch in neutral position, continuity should not exist between any pair of pins.