Wiper/Washer Switch
WARNING: This page is about a different car, the 1997 Saturn SW2 and 1997 Saturn SW1. However, it is still accessible from the selected car via links, so may be relevant.
Remove steering column covers to access connectors on back of multifunction switch (combination switch). Disconnect wiper/washer switch connector from right side of multifunction switch. Measure resistance across switch terminals. See WIPER/WASHER SWITCH RESISTANCE . See Fig 1 . If resistance is not as specified, replace rear wiper/washer switch.
WIPER/WASHER SWITCH RESISTANCE
| Switch Position | Terminals (1) | Ohms | ||
|---|---|---|---|---|
| OFF | "C" & "D" | Less Than One | ||
| ON | "B", "C" & "D" | Less Than One | ||
| WASH | "B", "C" & "D" | Infinite (Open) | ||
|
||||