Installation Procedure

Fig 1: Window & Insulator (Slide Clip) Retention Tabs

Courtesy of GENERAL MOTORS COMPANY

IMPORTANT: Before installing the door window, clear the window guide of any debris.

Install the door window into the door, aligning the sash with the window insulators (slide clips) and the window with the guides.
Slide the sash rearward onto the window insulators (slide clips).
Check the operation and alignment of the door window.

Fig 2: Door Speaker
Courtesy of GENERAL MOTORS COMPANY
Install the speaker.
Install the water deflector.
Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .