Conditions For Setting DTC

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2001 Saturn SW2, 2001 Saturn SL2, 2001 Saturn SL1, 2001 Saturn SL, and 2001 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.

DTC sets when IGN 1 voltage is present at SDM and driver deployment loop resistance is more than 4.8 ohms. DTC will also set if circuit 347 voltage is less than 2 volts and resistance is more than 6 ohms. Fault must be present for 0.5 second.