FixVault
Home › Saturn › 2002 › L200 Automatic › Repair and Diagnosis › External Pages › Different car › Section 277 (Antilock Brake System) › Repair Instructions › Wheel Speed Sensor Replacement - Front › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn LW300, 2003 Saturn LW200, 2003 Saturn L300, and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing & Installing ABS Sensor Bracket Assembly
    GM891918Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Position the wheel speed sensor bracket into the steering knuckle and install the fastener.

    Tighten:  Tighten the wheel speed sensor bracket-to-steering knuckle to 8 N.m (71 lb in).

  2. Install the wheel speed sensor into the bracket.

    Tighten:  Tighten the wheel speed sensor bracket-to-steering sensor bracket to 8 N.m (71 lb in).

  3. Connect the wheel speed sensor electrical connector.
    4. NOTE: Before installing wheels, remove rust or corrosion from wheel mounting surfaces and brake rotors/drums. Failure to do so can cause wheel nuts to loosen in service.
  4. Install the wheel and the tire assemblies onto the hub. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
About FixVault