FixVault
Home › Saturn › 2002 › L300 › Repair and Diagnosis › External Pages › Different car › Section 249 (Power Steering System) › Repair Instructions › Power Steering Pulley Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Power Steering Pump Pulley Remover
    GM649303Courtesy of GENERAL MOTORS CORP.
  1. Remove the Brake Pressure Modulator Valve (BPMV). Refer to Brake Pressure Modulator Valve (BPMV) Replacement in Antilock Brake System.
  2. Remove the Brake Pressure Modulator Valve (BPMV) bracket. Refer to Brake Pressure Modulator Valve (BPMV) Bracket Replacement in Antilock Brake System.
  3. Remove the accessory drive belt. Refer to Drive Belt Replacement - Accessory in Engine Mechanical-5.7L.
  4. Install the J 25034-C  on the power steering pump pulley and remove the pulley.
About FixVault