FixVault
Home › Saturn › 2002 › LW200 Automatic › Repair and Diagnosis › External Pages › Different car › Section 249 (Rear Suspension System) › Repair Instructions › Stabilizer Shaft Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
    3. Fig 1: Stabilizer Shaft Link & Nuts
    GM65328Courtesy of GENERAL MOTORS CORP.
  3. Remove the stabilizer shaft link nuts from the stabilizer shaft.
  4. Remove the stabilizer shaft clamps, bolts and nuts retaining the shaft to the crossmember.
  5. Remove the stabilizer shaft from the vehicle.
About FixVault