Camshaft Position Sensor: Installation
WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue and 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
Ensure the CMP sensor bore is completely free of any foreign material, such as old "O" ring, dirt, burrs, etc. Ensure that the flange on the CMP sensor bore is not damaged. Clean all mounting surfaces before reinstalling any components. Lubricate the CMP sensor "O" ring with clean engine oil. Install CMP sensor. Tighten CMP sensor bolt to specification. See TORQUE SPECIFICATIONS . Connect CMP sensor connector. Position coolant recovery tank onto the mounting studs. Install coolant recovery tank mounting nuts.