FixVault
Home › Saturn › 2002 › SL › Repair and Diagnosis › External Pages › Different car › Section 1 (Specifications & Procedures) › Wheel Alignment Procedures › Toe-In Adjustment (Rear) › "L" Series

"L" Series

WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2001 Saturn SW2, 2001 Saturn SL2, 2001 Saturn SL1, 2001 Saturn SL, and 2001 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove and discard rear axle control arm bolts. Install NEW rear axle control arm bolts, but do not tighten at this time. Leave inside forward bolt out. Install Rear Alignment Tool (KM 900) into open bolt hole.
  2. Using alignment tool, move rear axle control arm in direction necessary for toe correction. Snug rear axle control arm bolts, but do not tighten to final torque at this time. Recheck toe and readjust as necessary. Tighten bolts to specifications. See TORQUE SPECIFICATIONS  . Repeat procedure for other rear wheel.
About FixVault